Command Manual – Cluster
Quidway S3100 Series Ethernet Switches-Release 1510 Chapter 1 HGMPv2 Configuration Commands
Huawei Technologies Proprietary
1-3
Device Name : Quidway S3928
Port Duplex : AUTO
Product Ver : 3900-001
Table 1-1 Description on the fields of the display ndp command
Field Description
Neighbor Discovery Protocol
is enabled
NDP is enabled globally on the switch
Neighbor Discovery Protocol
Ver: 1
NDP version 1 is running
Hello Timer The interval to send NDP packets
Aging Timer
The holdtime of the NDP information
sent by the local switch
Interface Port index to specify a specific port
Status NDP is enabled on the port
Pkts Snd
Number of the NDP packets
transmitted through the port
Pkts Rvd
Number of the NDP packets received
through the port
Pkts Err
Number of the error NDP packets
received through the port
Neighbor 1: Aging Time
The holdtime of the NDP information
received from the neighbors
connected to the port
MAC Address MAC address of a neighbor device
Port Name Port name of a neighbor device
Software Ver Neighbor device software version
Device Name Device name of a neighbor device
Port Duplex Port duplex mode of a neighbor device
Product Ver Product version of a neighbor device
To Next Page
Loading...
Need help?
General