Huawei Quidway S3900 Series - Page 869

Command Manual – UDP Helper
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1
UDP Helper Configuration Commands
Huawei Technologies Proprietary
1-2
Description
Use the reset udp-helper packet command to clear statistics about the packets
forwarded by UDP Helper.
Example
# Clear statistics about the packets forwarded by UDP Helper.
<Quidway> reset udp-helper packet
1.1.3 udp-helper enable
Syntax
udp-helper enable
undo udp-helper enable
View
System view
Parameter
None
Description
Use the udp-helper enable command to enable UDP Helper function.
Use the undo udp-helper enable command to disable UDP Helper function.
By default, UDP Helper is disabled.
Example
# Enable UDP Helper.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] udp-helper enable
1.1.4 udp-helper port
Syntax
udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp | time }
undo udp-helper port { port-number | dns | netbios-ds | netbios-ns | tacacs | tftp |
time }
View
System view