Huawei Quidway S3900 Series - Page 915

Command Manual – NTP
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1 NTP Configuration Commands
Huawei Technologies Proprietary
1-3
Parameter
None
Description
Use the display ntp-service status command to display the status of NTP service.
Example
# View the status of the local NTP service.
<Quidway> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^17
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Table 1-2 Description on the fields of the display ntp-service status command
Field Description
Clock status Local clock status
Clock stratum Stratum of the local clock
Reference clock ID
Address of the remote server or the ID of the
reference clock after the local system is
synchronized to a remote NTP server or a
reference clock
Nominal frequency
Nominal frequency of the local system hardware
clock
Actual frequency
Actual frequency of the local system hardware
clock
Clock precision Precision of the local system clock
Clock offset
Offset of the local clock with regard to the NTP
server
Root delay
Roundtrip delay between the local system and
the server that serves as the primary reference
clock
Root dispersion
The maximum dispersion of the local clock with
regard to the primary reference clock