Command Manual – File System Management
Quidway S3900 Series Ethernet Switches-Release 1510
Chapter 1 File System Management Configuration
Commands
Huawei Technologies Proprietary
1-10
Parameter
/all: Displays the information about all the files, including those in the recycle bin.
/fabric: Displays the information about all the specified files in the fabric.
file-ur: Path name or the name of a file in the Flash memory. You can use the *
character as a wildcard. For example, the dir *.txt command displays the information
about all the files with the extension of txt in the current directory.
Description
Use the dir command to display the information about the specified files or directories
in the Flash memory on a switch.
You can use the * character as a wildcard.
In the output information, files with the main, backup or main/backup attribute a
tagged..
Note:
In the output information of the dir /all command, deleted files (that is, those in the
recycle bin) are embraced in brackets.
Example
# Display the information about all the normal files in the root directory of the file system
on the local unit.
<Quidway> dir
Directory of unit1>flash:/
1 (*) -rw- 5792495 Apr 02 2000 00:06:50 s3900.bin
2 (*) -rw- 1965 Apr 01 2000 23:59:13 3comoscfg.cfg
3 -rw- 5841301 Apr 02 2000 21:42:13 s3900d8.bin
4 -rw- 224 Apr 02 2000 01:36:30 s3800.bin
5 -rw- 279296 Apr 02 2000 00:22:01 test.abc
15367 KB total (3720 KB free)
(*) -with main attribute (b) -with backup attribute
(*b) -with both main and backup attribute
# Display the information about all the files (including the files in the recycle bin) in the
root directory of the file system of the fabric.
<Quidway> dir /all /fabric
Directory of unit1>flash:/
1 (*) -rw- 5792495 Apr 02 2000 00:06:50 s3900.bin
2 -rwh 4 Apr 01 2000 23:55:26 snmpboots
To Next Page
Loading...
