Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 ARP Configuration Commands
Huawei Technologies Proprietary
2-8
Example
# Display the current setting of the ARP map aging timer.
[Quidway] display arp timer aging
Current ARP aging time is 10 minute(s)
2.1.10 display arp vlan
Syntax
display arp vlan vlan-id
View
Any view
Parameter
vlan-id: VALN interface ID
Description
Using the display arp vlan command, you can view the ARP mapping table of a
specified VLAN.
Example
# Display the ARP table of VLAN1.
[Quidway]display arp vlan 1
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Port Name Aging Type
10.1.1.2 00e0-fc01-0102 1 Ethernet3/0/1 N/A S
2.1.11 reset arp
Syntax
reset arp [ dynamic | static | interface { interface_type interface_num |
interface_name } ]
View
User view
Parameter
dynamic: Clear the dynamic ARP mapping entries.
static: Clear the static ARP mapping entries

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English