Huawei Quidway S6500 Series - Ntp-Service Disable; Ntp-Service In-Interface Disable

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 7 NTP Configuration Commands
Huawei Technologies Proprietary
7-8
Example
# Configure to broadcast NTP packets via Vlan-Interface1 and encrypt them with Key 4
and set the NTP version number as 3.
[Quidway] interface vlan-interface1
[Quidway-Vlan-Interface1] ntp-service broadcast-server authentication-key 4 version 3
7.1.10 ntp-service disable
Syntax
ntp-service disable
undo ntp-service disable
View
System view
Parameter
None
Description
Using ntp-service disable command, you can disable the NTP service function
globally. Using undo ntp-service disable command, you can enable this function
globally.
By default, the NTP service is enabled.
Example
# Disable NTP service function.
[Quidway] ntp-service disable
7.1.11 ntp-service in-interface disable
Syntax
ntp-service in-interface disable
undo ntp-service in-interface disable
View
VLAN interface view
Parameter
None