Huawei Quidway S6500 Series - Ipx Sap Gns-Disable-Reply; Ipx Sap Gns-Load-Balance

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-14
Description
Using the ipx sap disable command, you can disable SAP on the current VLAN
interface. Using the undo ipx sap disable command, you can enable SAP on the
current VLAN interface.
By default, SAP is enabled on the VLAN interface when IPX is enabled.
Example
# Disable SAP on VLAN interface 1.
[Quidway-Vlan-interface1] ipx sap disable
7.1.17 ipx sap gns-disable-reply
Syntax
ipx sap gns-disable-reply
undo ipx sap gns-disable-reply
View
VLAN interface view
Parameter
None
Description
Using the ipx sap gns-disable-reply command, you can disable IPX GNS reply on
the current VLAN interface. Using the undo ipx sap gns-disable-reply command,
you can enable IPX GNS reply on the current VLAN interface.
By default, GNS reply is enabled on the VLAN interface.
Example
# Disable GNS reply on VLAN interface 1.
[Quidway-Vlan-interface1] ipx sap gns-disable-reply
7.1.18 ipx sap gns-load-balance
Syntax
ipx sap gns-load-balance
undo ipx sap gns-load-balance
View
System view