Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-31
5.1.33 peer advertise-community
Syntax
peer group-name advertise-community
undo peer group-name advertise-community
View
BGP view
Parameter
group-name: Name of peer group.
Description
Using peer advertise-community command, you can enable the transmission of the
community attribute to a peer group. Using undo peer advertise-community
command, you can cancel the existing configuration.
By default, the community attribute is not transmitted to any peer group.
For the related commands, see if-match community-list, apply community.
Example
# Transmit community attribute to the peer group name test.
[Quidway-bgp] peer test advertise-community
5.1.34 peer allow-as-loop
Syntax
peer { group-name | peer-address } allow-as-loop [ number ]
undo peer { group-name | peer-address } allow-as-loop
View
BGP view
Parameter
group-name: Specify name of the peer group.
peer-address: Specify IP address of the peer.
number: Specify the repeating times of local AS, ranging from 1 to 10.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English