Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-10
Example
# Set the maximum RIP update packet size to 500 bytes on VLAN interface 1.
[Quidway-Vlan-interface1] ipx rip mtu 500
7.1.11 ipx rip multiplier
Syntax
ipx rip multiplier multiplier
undo ipx rip multiplier
View
System view
Parameter
multiplier: A multiplier of the update interval, decides the aging period of the RIP
routing entries together with the update interval. It is in the range 1 to 1000 and
defaults to 3. Multiplying the update interval by the multiplier, you can get the actual
aging period.
Description
Using the ipx rip multiplier command, you can configure the aging period of the RIP
routing entries. Using the undo ipx rip multiplier command, you can restore the
default.
For the related command, see ipx rip timer update.
Example
# Set the RIP aging period of the routing entries to five times the update interval.
[Quidway] ipx rip multiplier 5
7.1.12 ipx rip timer update
Syntax
ipx rip timer update seconds
undo ipx rip timer update
View
System view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English