Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 8 SSH Configuration Commands
Huawei Technologies Proprietary
8-4
Description
Using the display ssh server command, you can display SSH state or session
information.
For the related commands, see ssh server authentication-retries, ssh server
rekey-interval, ssh server timeout.
Example
# Display SSH state and configuration parameters.
<Quidway> display ssh server status
SSH version : 1.5
SSH connection timeout : 60 seconds
SSH server key generating interval : 1 hours
SSH Authentication retries : 3 times
# Display SSH sessions.
<Quidway> display ssh server session
Connection Version Encryption State Username
VTY0 1.5 DES Session started Quidway
VTY3 1.5 DES Session started switch
8.1.5 display ssh user-information
Command
display ssh user-information [ username ]
View
Any view
Parameter
username: Valid SSH user named defined by AAA
Description
Using the display ssh user-information command, you can display information of the
user, including username, corresponding key, authentication type. If a username is
specified, the system just gives its information.
For the related commands, see ssh user username assign rsa-key, ssh user
username authentication-type.
Example
# Display SSH user information.
<Quidway> display ssh user-information

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English