Huawei Quidway S6500 Series - Display Memory

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-8
Parameter
fan-id: the fan ID.
Description
Using display fan command, you can view the working state of the built-in fans. User
can Perform this command to see if they work normally.
Example
# Display the working state of the fans.
<Quidway> display fan
Fan 1 State: Normal
Fan 2 State: Normal
Fan 3 State: Normal
The above information indicates that all of the four fans work normally.
3.1.10 display memory
Syntax
display memory [ slot slot-number ]
View
Any view
Parameter
slot-number: Specify slot number
Description
Using display memory command, you can display memory situation.
Example
# Display memory situation.
<Quidway> display memory
System Total Memory(bytes): 32491008
Total Used Memory(bytes): 13181348
Used Rate: 40%