Huawei Quidway S6500 Series Command Manual

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-16
Description
Using port access vlan command, you can join the access port to a specified VLAN.
Using undo port access vlan command, you can cancel the access port from the
VLAN.
The use condition of this command is the VLAN indicated in vlan_id must exist.
Example
# Join Ethernet1/0/1 port to VLAN3 (VLAN3 has existed).
[Quidway-Ethernet1/0/1] port access vlan 3
1.1.18 port hybrid pvid vlan
Syntax
port hybrid pvid vlan vlan_id
undo port hybrid pvid
View
Ethernet port view
Parameter
vlan_id: VLAN ID defined in IEEE802.1Q, ranging from1 to 4094 and the default
vlan_id is 1.
Description
Using port hybrid pvid vlan command, you can configure the default VLAN ID of the
hybrid port. Using undo port hybrid pvid command, you can restore the default VLAN
ID of the hybrid port.
The default VLAN ID of local hybrid port shall be consistent with that of the peer one,
otherwise, the packet cannot be properly transmitted.
For the related command, see port link-type.
Example
# Configure the default VLAN of the hybrid port Ethernet1/0/1 to 100.
[Quidway-Ethernet1/0/1] port hybrid pvid vlan 100
1.1.19 port hybrid vlan
Syntax
port hybrid vlan vlan_id_list { tagged | untagged }
undo port hybrid vlan vlan_id_list

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English