Huawei Quidway S6500 Series - Display Qos-Interface Traffic-Red

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-12
2.1.10 display qos-interface traffic-red
Syntax
display qos-interface [ interface-name | interface-type interface-num ] traffic-red
View
Any view
Parameter
interface-name | interface-type interface-num: Interface of the switch, for more detail,
please refer to Command Manual – Port.
Description
Using the display qos-interface traffic-red command, you can view the configuration
information of the RED operation.
The cards except A type ones do not support traffic RED function.
For the related configuration, see traffic-red.
Example
# Display the parameter configuration of traffic limitation.
<Quidway> display qos-interface gigabitEthernet5/0/1 traffic-red
GigabitEthernet5/0/1: traffic-red
Outbound:
Matches: acl r1 rule 0 running
Queue length of start random discarding: 64
Queue length of stop random discarding: 128
Max probability of discarding: 20