Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-36
Description
Using the traffic-redirect command, you can activate ACL and perform redirection (the
command is only effective to permit rule). Using the undo traffic-redirect command,
you can remove the redirection.
For the related configuration, see display qos-interface traffic-redirect.
 Note:
Only the cards except A type ones support the packet redirecting configuration.
Only the rule with the action of permit can be activated by this command successfully.
Example
# Perform redirection to the packets that match with the permit rule of ACL 2000.
Redirect the packets to interface GigabitEthernet7/0/2.
[Quidway-qosb-GigabitEthernet7/0/1] traffic-redirect inbound ip-group 2000 interface
gigabitethernet7/0/2
2.1.27 traffic-statistic
Syntax
I. The Command Line Format for for A type Card
traffic-statistic { inbound | outbound } { ip-group { acl-number | acl-name } [ rule
rule ] | link-group { acl-number | acl-name } [ rule rule ] }
undo traffic-statistic { inbound | outbound } { ip-group { acl-number | acl-name }
[ rule rule ] | link-group { acl-number | acl-name } [ rule rule] }
 Note:
A type card includes LS81FT48A, LS81FM24A, LS81FS24A, LS81GB8UA and
LS81GT8UA cards.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English