Huawei Quidway S6500 Series Command Manual

Command Manual - Reliability
Quidway S6500 Series Ethernet Switches Chapter 1 VRRP Configuration Commands
Huawei Technologies Proprietary
1-6
You should set correspondence between the virtual IP address of the virtual router and
the MAC address before configuring the virtual router. Otherwise, you cannot configure
the correspondence.
If the virtual MAC address using the routing interface of the switch matches with the
virtual IP address of the virtual router, only one virtual router can be configured on the
VLAN interface.
Example
# Set the real MAC address of the interface match the virtual IP address of the virtual
router.
[Quidway] vrrp method real-mac
1.1.6 vrrp ping-enable
Syntax
vrrp ping-enable
undo vrrp ping-enable
View
System view
Parameter
None
Description
Use the vrrp ping-enable command to enable the function to ping the virtual IP
address of the virtual router.
Use the undo vrrp ping-enable command to disable the function to ping the virtual IP
address of the virtual router.
By default, the ping function is disabled.
You can only use the commands before configuring the virtual router.
Example
# Enable the function to ping the virtual IP address of the virtual router.
[Quidway] vrrp ping-enable

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English