Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-1
Chapter 1 File System Management Commands
1.1 File System
 Note:
S6506R supports master board and slave board. The two boards both have file system.
User can operate the file on the two boards. In the case user operate the file on slave
board, the file directory or URL should be started with “slot[No.]#flash:”, the [No.] is the
slave board number. For example, suppose slot 1 is slave board, “text.txt” file URL on
slave board should be “slot1#flash:/text.txt”.
1.1.1 cd
Syntax
cd directory
View
User view
Parameter
directory: Destination directory; By default, the directory is the working path configured
by the user when the system starts.
Description
Using cd command, you can change the current user configuration path on the
Ethernet Switch.
Example
# Change the current working directory of the switch to flash.
<Quidway>cd flash:
<Quidway>pwd
flash:

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English