Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-7
BootROM Version : 500
CPLD Version : 002
Software Version : S6506R-3009
LPU 2: uptime is 0 weeks,0 days,0 hours,42 minutes
QuidwayS6500 LPU with 1 MPC850 Processor
64M bytes SDRAM
0K bytes Flash Memory
0K bytes NVRAM Memory
PCB Version : VER.0
BootROM Version : 403
CPLD Version : 003
Software Version : S6506R-3009
4.3 System Debug Commands
4.3.1 debugging
Syntax
debugging { all | module-name [ debugging-option ] }
undo debugging { all | module-name [ debugging-option ] }
View
User view
Parameter
all: Enable or disable all the debugging.
module-name: Specify the module name.
debugging-option: Debugging option.
Description
Using debugging command, you can enable the system debugging. Using undo
debugging command, you can disable the system debugging.
By default, all the debugging processes are disabled.
Ethernet Switch provides various kinds of debugging functions for technical support
personnel and experienced maintenance staff to troubleshoot the network.
Enabling the debugging will generate a large amount of debugging information and
decrease the system efficiency. Specially, network system may collapse after all the
debugging is enabled by debugging all command. So it is not suggested to use the
debugging all command. It is convenient for the user to disable all the debugging with
undo debugging all command.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English