Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-5
[Quidway-bgp] peer Confed38 as-number 38
[Quidway-bgp] peer 10.1.1.1 group Confed38
[Quidway-bgp] group Remote98 external
[Quidway-bgp] peer Remote98 as-number 98
[Quidway-bgp] peer 200.1.1.1 group Remote98
5.1.5 confederation nonstandard
Syntax
confederation nonstandard
undo confederation nonstandard
View
BGP view.
Parameter
none
Description
Using confederation nonstandard command, you can configure the router to be
compatible with routers not following RFC1965. Using undo confederation
nonstandard command, you can disable this function.
By default, it is in accordance with RFC1965.
For the related commands, see confederation id, confederation peer-as.
Example
# AS100 contains routers following nonstandard, which is composed of two sub-ASs,
64000 and 65000.
[Quidway] bgp 64000
[Quidway-bgp] confederation id 100
[Quidway-bgp] confederation peer-as 65000
[Quidway-bgp] confederation nonstandard
5.1.6 confederation peer-as
Syntax
confederation peer-as as-number-1 [... as-number-n ]
undo confederation peer-as [ as-number-1 ] [... as-number-n ]