Huawei Quidway S6500 Series - Default Cost; Display Rip

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 2 RIP Configuration Commands
Huawei Technologies Proprietary
2-2
2.1.2 default cost
Syntax
default cost value
undo default cost
View
RIP view
Parameter
value: the default routing cost to be set, ranging from 1 to 16. The default value is 1.
Description
Using default cost command, you can set the default routing cost of an imported route.
Using undo default cost command, you can restore the default value.
If no specific routing cost is specified when importing the route of another routing
protocol with the import-route command, the importing will be performed with the
default routing cost specified with the default cost command.
For the related commands, see import-route.
Example
# Set the default routing cost of the imported route of another routing protocol to 3.
[Quidway-rip] default cost 3
2.1.3 display rip
Syntax
display rip
View
Any view
Parameter
None
Description
Using display rip command, you can view the current RIP running state and its
configuration information.
Example
# Display the current running state and configuration information of the RIP.