Huawei Quidway S6500 Series Command Manual

Command Manual - VLAN
Quidway S6500 Series Ethernet Switches Chapter 2 GARP/GVRP Configuration Commands
Huawei Technologies Proprietary
2-2
2.1.2 display garp timer
Syntax
display garp timer [ interface interface-list ]
View
Any view
Parameter
interface-list: List of Ethernet port to be displayed, expressed as interface -list =
{ { interface_type interface_num | interface_name } [ to { interface_type interface_num
| interface_name } ] }&<1-10>. interface_type is interface type, interface_numis
interface number and interface_name is interface name. For their meanings and value
range, read command parameters description of “Port” in this document.
&<1-10>: Representing the repeatable times of parameters, 1 is the minimal and 10 is
the maximal.
Description
Using display garp timer command, you can view the value of GARP timer, including
Hold timer, Join timer, Leave timer and LeaveAll timer.
For the related command, see garp timer, garp timer leaveall.
Example
# Show GARP timer on Ethernet1/0/1.
<Quidway> display garp timer interface ethernet1/0/1
GARP timers on port Ethernet1/0/1
GARP JoinTime : 20 centiseconds
GARP Leave Time : 60 centiseconds
GARP LeaveAll Time : 1000 centiseconds
GARP Hold Time : 10 centiseconds
2.1.3 garp timer
Syntax
garp timer { hold | join | leave } timer_value
undo garp timer { hold | join | leave }
View
Ethernet port view

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English