Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-8
packet: Indicating to enable BGP packet information debugging.
route-refresh: Indicating to enable BGP route-refresh packet information debugging.
update: Indicating to enable BGP Update packet information debugging.
receive: Information of receiving packets.
send: Information of sending packets.
verbose: Detailed information.
Description
Using debugging bgp all command, you can enable all the information debugging of
BGP packet and events.
Using debugging bgp event command, you can enable the information debugging of
BGP events
Using debugging bgp keepalive command, you can enable the information
debugging of BGP Keepalive packets.
Using debugging bgp packet command, you can enable the information debugging of
BGP packets.
Using undo debugging bgp command, you can disable the debugging functions.
Example
# Enable the information debugging of BGP packets.
<Quidway> debugging bgp packet
5.1.9 default local-preference
Syntax
default local-preference value
undo default local-preference
View
BGP view
Parameter
value: Default local preference to be configured. The range is 0 to 4294967295. By
default, its value is 100.
Description
Using default local-preference command, you can configure the default local
preference. Using undo default local-preference command, you can restore the
default value.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English