Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-17
3.1.18 display ospf error
Syntax
display ospf [ process-id ] error
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf error command, you can view the OSPF error information.
Example
# Display the OSPF error information.
<Quidway> display ospf error
OSPF Process 1 with Router ID 1.1.1.1
OSPF packet error statistics:
0: IP: received my own packet 0: OSPF: wrong packet type
0: OSPF: wrong version 0: OSPF: wrong checksum
0: OSPF: wrong area id 0: OSPF: area mismatch
0: OSPF: wrong virtual link 0: OSPF: wrong authentication type
0: OSPF: wrong authentication key 0: OSPF: too small packet
0: OSPF: packet size > ip length 0: OSPF: transmit error
0: OSPF: interface down 0: OSPF: unknown neighbor
0: HELLO: netmask mismatch 0: HELLO: hello timer mismatch
0: HELLO: dead timer mismatch 0: HELLO: extern option mismatch
0: HELLO: router id confusion 0: HELLO: virtual neighbor unknown
0: HELLO: NBMA neighbor unknown 0: DD: neighbor state low
0: DD: router id confusion 0: DD: extern option mismatch
0: DD: unknown LSA type 0: LS ACK: neighbor state low
0: LS ACK: wrong ack 0: LS ACK: duplicate ack
0: LS ACK: unknown LSA type 0: LS REQ: neighbor state low
0: LS REQ: empty request 0: LS REQ: wrong request
0: LS UPD: neighbor state low 0: LS UPD: newer self-generate LSA
0: LS UPD: LSA checksum wrong 0: LS UPD: received less recent LSA
0: LS UPD: unknown LSA type 0: OSPF routing: next hop not exist
0: DD: MTU option mismatch 0: ROUTETYPE: wrong type value

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English