Huawei Quidway S6500 Series - Reset Saved-Configuration

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-20
View
Any view
Parameter
None
Description
Using the display startup command, you can display the configuration filenames used
for the current and the next start-ups.
For the related command, see startup saved-configuration.
Example
# Display the configuration filenames used for the current and the next start-ups.
<Quidway> display startup
MainBoard:
Startup saved-configuration file: flash:/vrpcfg.cfg
Next startup saved-configuration file: flash:/vrpcfg.cfg
1.2.5 reset saved-configuration
Syntax
reset saved-configuration
View
User view
Parameter
none
Description
Using reset saved-configuration command, you can erase configuration files from
the flash memory of the Ethernet Switch.
Perform this command with cautious. It is suggested to consult technical support
personnel first.
Generally, this command is used in the following situations:
z After upgrade of software, configuration files in flash memory may not match the
new version's software. Perform reset saved-configuration command to erase
the old configuration files.