Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-14
Example
# Configure name of the delivered VLAN
[Quidway-vlan100] name test
2.1.14 password
Syntax
password { simple | cipher } password
undo password
View
Local user view
Parameter
simple: Specifies to display passwords in simple text.
cipher: Specifies to display passwords in cipher text.
password: Defines a password. For simple mode, the password must be in plain text.
For cipher mode, the password can be either in encrypted text or in plain text. The
result is determined by the input. A plain text password is a character string of no more
than 16 characters, for example, huawei918. The password must be an encrypted
string of 24 characters in length, for example, _(TT8F]Y\5SQ=^Q`MAF4<1!!.
Description
Using password command, you can configure a password for local users. Using undo
password command, you can cancel the specified password.
If local-user password-display-mode cipher-force has been adopted, the user
efforts of using the password command to set the password display mode to simple
text (simple) will render useless.
For the related command, see display local-user.
Example
# Set the user huawei1 to display the password in simple text, given the password is
20030422.
[Quidway-luser-huawei1] password simple 20030422
2.1.15 radius-scheme
Syntax
radius-scheme radius-scheme-name

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English