Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-16
….
4.5.4 display logbuffer summary
Syntax
display logbuffer summary [ level severity ]
View
Any view
Parameter
level: Information level.
severity: Information level, do not output information below this level. By default, the log
information level is warnings, the trap information level is debugging, the debugging
information level is debugging.
Information at different levels is as follows:
z emergencies: Level 1 information, which cannot be used by the system.
z alerts: Level 2 information, to be reacted immediately.
z critical: Level 3 information, critical information.
z errors: Level 4 information, error information.
z warnings: level 5 information, warning information.
z notifications: Level 6 information, showed normally and important.
z informational: Level 7 information, notice to be recorded.
z debugging: Level 8 information, generated during the debugging progress.
Description
Using display logbuffer summary command, you can view the summary information
recorded in logbuffer.
For the related commands, see info-center enable,info-center loghost,info-center
logbuffer,info-center console channel,info-center monitor channel.
Example
# Show the summary information recorded in logbuffer.
<Quidway> display logbuffer summary
EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
0 0 0 0 94 0 1 0
display trapbuffer
4.5.5 Syntax
display trapbuffer [ size buffersize ]

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English