Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 4 System Maintenance Commands
Huawei Technologies Proprietary
4-18
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name with a character string not exceeding 30
characters, excluding "-", "/" or "\". .
Description
Using info-center channel name command, you can rename a channel specified by
the channel-number as channel-name. Using undo info-center channel command,
you can restore the channel name.
Note that the channel name cannot be duplicated.
Example
# Rename the channel 0 as execconsole.
[Quidway] info-center channel 0 name execconsole
4.5.7 info-center console channel
Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Parameter
channel-number: Channel number, ranging from 0 to 9, that is, system has ten
channels.
channel-name: Specify the channel name. The name can be channel6, channel7,
channel8, channel9, console, logbuffer, loghost, monitor, snmpagent, trapbuffer.
Description
Using info-center console channel command, you can configure the channel through
which the log information is output to the console.
By default, Ethernet switches output log information to the console.
This command takes effect only after system logging is started.
For the related commands, see info-center enable,display info-center.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English