Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-19
Parameter
None
Description
Using the ipx split-horizon command, you can enable split horizon on the current
VLAN interface. Using the undo ipx split-horizon command, you can disable split
horizon on the current VLAN interface.
By default, the split horizon of IPX is enabled.
Example
# Enable split horizon on VLAN interface 1.
[Quidway-Vlan-interface1] ipx split-horizon
7.1.25 ipx tick
Syntax
ipx tick ticks
undo ipx tick
View
VLAN interface view
Parameter
ticks: Delay in ticks; it is in the range 0 to 30000 and defaults to 1.
Description
Using the ipx tick command, you can configure an IPX packet forwarding delay on
the VLAN interface. Using the undo ipx tick command, you can restore the default.
Example
# Configure VLAN interface 1 to experience a delay of five ticks before forwarding IPX
packets.
[Quidway-Vlan-interface1] ipx tick 5
7.1.26 ipx update-change-only
Syntax
ipx update-change-only
undo ipx update-change-only

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English