Huawei Quidway S6500 Series - Display Mac-Address

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 2 MAC Address Table Management Commands
Huawei Technologies Proprietary
2-2
Parameter
none
Description
Using display mac-address aging-time command, you can view the aging time of the
dynamic entry in the MAC address table.
For the related commands, see mac-address, mac-address timer, display
mac-address.
Example
# Display the aging time of the dynamic entry in the MAC address table.
[Quidway] display mac-address aging-time
Mac address aging time: 300s
The above information indicates that the aging time of the dynamic entry in the MAC
address is 300s.
2.1.3 display mac-address
Syntax
display mac-address [ mac-addr [ vlan vlan-id ] | [ static | dynamic ] [ interface
{ interface-name | interface-type interface-num } ] [ vlan vlan-id ] [ count ] ]
View
Any view
Parameter
mac-addr: Specify the MAC address.
vlan-id: Specify the VLAN ID.
static: Static table entry, lost after resetting switch.
dynamic: Dynamic table entry, which will be aged.
interface-type: Specify the interface type.
interface-num: Specify the interface number.
interface-name: Specify the interface name.
For details about the interface-type, interface-num and interface-name parameters,
refer to the Port Configuration in this manual.
count: the display information will only contain the sum number of MAC addresses in
the MAC address table if user choice this parameter when using this command.