Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-24
2.2.5 display radius
Syntax
display radius [ radius-scheme-name ]
View
Any view
Parameter
radius-scheme-name: Specifies the RADIUS scheme name with a character string not
exceeding 32 characters. Display all RADIUS schemes when the parameter is not set.
Description
Using display radius command, you can view the configuration information of all
RADIUS schemes or a specified one.
By default, This command outputs the configuration information about the specified or
all the RADIUS schemes. The output can help with RADIUS diagnosis and
troubleshooting.
For the related command, see radius scheme.
Example
# Display the configuration information of all the RADIUS schemes.
<Quidway> display radius
------------------------------------------------------------------
SchemeName =system Index=0 Type=huawei
Primary Auth IP =127.0.0.1 Port=1645 State=block
Primary Acct IP =127.0.0.1 Port=1646 State=block
Second Auth IP =0.0.0.0 Port=1812 State=block
Second Acct IP =0.0.0.0 Port=1813 State=block
Auth Server Encryption Key= huawei
Acct Server Encryption Key= huawei
Accounting method = required
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =1
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English