Huawei Quidway S6500 Series Command Manual

Command Manual - PoE
Quidway S6500 Series Ethernet Switches Chapter 1 PoE Configuration Commands
Huawei Technologies Proprietary
1-12
1.1.11 poe power max-value
Syntax
poe power max-value max-value
View
System view
Parameter
max-value: Maximum PoE power output on the switch, ranging from 37 to 2400 W.
Description
By default, maximum PoE power output on the switch is 2400 W.Using the poe power
max-value command, you can set the maximum power that can be supplied externally
by the switch.
Note:
This command works only when the power you specified is greater than the power that
has been distributed to the boards.
Example
# Set the maximum power supplied externally by the switch to 2000 W.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] poe power max-value 2000
1.1.12 poe power-management
Syntax
poe power-management { auto | manual } slot slot-num
View
System view
Parameter
auto: Configures the PoE management mode of the switch to auto.
manual: Configures the PoE management mode of the switch to manual.
slot-num: Slot number.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English