Huawei Quidway S6500 Series - Reset Ipx Routing-Table Statistics Protocol

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-20
View
VLAN interface view
Parameter
None
Description
Using the ipx update-change-only command, you can enable update by trigger on
the current VLAN interface. Using the undo ipx update-change-only command, you
can restore the default.
By default, update by trigger is disabled.
Example
# Enable the update by trigger feature of IPX on VLAN interface 1.
[Quidway-Vlan-interface1] ipx update-change-only
7.1.27 reset ipx routing-table statistics protocol
Syntax
reset ipx routing-table statistics protocol { all | default | direct | rip | static }
View
User view
Parameter
all: Clears the statistics of all the IPX routes.
default: Clears the statistics of the default IPX routes.
direct: Clears the statistics of the direct IPX routes.
rip: Clears the statistics of the IPX RIP routes.
static: Clears the statistics of the static IPX routes.
Description
Using the reset ipx routing-table statistics protocol command, you can clear the
statistics on the IPX routes of a specific routing type.
For the related command, see display ipx routing-table statistics.
Example
# Clear the statistics of the IPX static routes.
<Quidway> reset ipx routing-table statistics protocol static