Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-11
View
System view
Parameter
enable: Enables pause frame protection mechanism.
disable: Disables pause frame protection mechanism.
slot slot-num: Specifies the board seated in the slot determined by the parameter
slot-num.
Description
Use the pause-protection command to enable/disable pause frame protection
mechanism.
Pause frame protection mechanism is disabled by default.
Pause frames, which can be utilized as packets to attack a network, are used in traffic
controlling. A switch that has pause frame protection mechanism enabled discards the
detected pause frames that are utilized to attack the network it resides and logs these
attacks in the logbuffer. If the switch experiences successive pause frame attacks, it
sends messages to the console to warn users.
Example
# Enable pause frame protection mechanism on the board in slot 7.
[Quidway] pause-protection enable slot 7
3.1.15 product
Syntax
product { 6503 | 6506 }
View
System view
Parameter
6503: Specifies the switch type to S6503.
6506: Specifies the switch type to S6506.
Description
Using the product command, you can specify the switch type.
If the Salience III series engines works with the S6503 chassis without the XGbus
silkscreen, the system cannot recognize the current switch type. And then you need to
specify the switch type to S6503 by the product 6503 command. After that, if you want

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English