Huawei Quidway S6500 Series Command Manual

Command Manual - Getting Started
Quidway S6500 Series Ethernet Switches Chapter 1 Logging in Ethernet Switch Commands
Huawei Technologies Proprietary
1-7
Field Description
Delay Indicates the interval from the latest input till now in seconds.
Type User type
IPaddress
Displays initial connection location, namely the host IP address of
the incoming connection.
Username
Display the name of the user using this user interface, namely the
login username of the user.
1.1.8 flow-control
Syntax
flow-control { hardware | none | software }
undo flow-control
View
User interface view
Parameter
hardware: Configures to perform hardware flow control.
none: Configures no flow control.
software: Configures to perform software flow control.
Description
Using flow-control command, you can configure the flow control mode on AUX
(Console) port. Using undo flow-control command, you can restore the default flow
control mode.
This command can only be performed in AUX user interface view.
By default, the value is none. That is, no flow control will be performed.
Example
# Configure software flow control on AUX (Console) port.
[Quidway-ui-aux0] flow-control software
1.1.9 free user-interface
Syntax
free user-interface [ type ] number

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English