Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 6 IP Routing Policy Configuration Commands
Huawei Technologies Proprietary
6-8
For the related commands, see ip ip-prefix.
Example
# Display the information of the address prefix list named as p1.
<Quidway> display ip ip-prefix p1
name index conditions ip-prefix / mask GE LE
p1 10 permit 10.1.0.0/16 17 18
Table 6-1 Description of information generated by the command display ip ip-prefix
Field Description
name Name of ip-prefix
index Internal sequence number of ip-prefix
conditions Mode: permit or deny
ip-prefix / mask Address and network segment length of ip-prefix
GE Greater-equal value of ip-prefix network segment length
LE Less-equal value of ip-prefix network segment length
6.1.11 display route-policy
Syntax
display route-policy [ route-policy-name ]
View
Any view
Parameter
route-policy-name: Specifies displayed Route-policy name. The length of
route-policy-name parameter ranges from 1 to 16 character string.
Description
Using display route-policy command, you can view the configured Route-policy
For the related commands, see route-policy.
Example
# Display the information of Route-policy named as policy1.
<Quidway> display route-policy policy1
Route-policy : policy1
Permit 10 : if-match (prefixlist) p1

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English