Huawei Quidway S6500 Series Command Manual

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-7
Description
Using dot1x max-user command, you can configure a limit to the amount of
supplicants on the specified interface of 802.1x. Using undo dot1x max-user
command, you can restore the default value.
This command is used for setting a limit to the amount of supplicants that 802.1x can
hold on the specified interface. This command has effect on the interface specified by
the parameter interface-list when executed in system view. It has effect on all the
interfaces when no interface is specified. The parameter interface-list cannot be input
when the command is executed in Ethernet Port view and it has effect only on the
current interface.
For the related commands, see display dot1x.
Example
# Configure the interface Ethernet 3/0/1 to hold no more than 32 users.
[Quidway] dot1x max-user 32 interface Ethernet 3/0/1
1.1.7 dot1x port-control
Syntax
dot1x port-control { auto | authorized-force | unauthorized-force } [ interface
interface-list ]
undo dot1x port-control [ interface interface-list ]
View
System view/Ethernet port view
Parameter
auto: Automatic identification mode, configuring the initial state of the interface as
unauthorized. The user is only allowed to receive or transmit EAPoL packets but not to
access the network resources. If the user passes the authentication flow, the interface
will switch over to the authorized state and then the user is allowed to access the
network resources. This is the most common case.
authorized-force: Forced authorized mode, configuring the interface to always stay in
authorized state and the user is allowed to access the network resources without
authentication/authorization.
unauthorized-force: Forced unauthorized mode, configuring the interface to always
stay in non-authorized mode and the user is not allowed to access the network
resources.
interface interface-list: Ethernet interface list including several Ethernet interfaces,
expressed in the format interface-list = { interface-num [ to interface-num ] } & < 1-10 >.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English