Huawei Quidway S6500 Series Command Manual

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 2 Link Aggregation Configuration Commands
Huawei Technologies Proprietary
2-3
2.1.4 debugging lacp state
Syntax
debugging lacp state [ interface { interface-type interface-number | interface-name }
[ to { interface-type interface-num | interface-name } ] ] { { actor-churn | mux |
partner-churn | ptx | rx }* | all }
undo debugging lacp state [ interface { interface-type interface-number |
interface-name } [ to { interface-type interface-num | interface-name } ] ] { { actor-churn
| mux | partner-churn | ptx | rx }* | all }
View
User view
Parameter
interface { interface_type interface_ num | interface_name } [ to { interface_type
interface_ num | interface_name } ]: Specifies ports. You can specify multiple sequential
ports with the to parameter, instead of specifying only one port. interface_name
specifies port name, in the format of interface_name = interface_type interface_num.
interface_type specifies port type and interface_num port number. For more
information, see the parameter item for the interface command.
actor-churn: Debugging actor-churn state machine.
mux: Debugging MUX state machine.
partner-churn: Debugging partner-churn state machine.
ptx: Debugging PTX state machine.
rx: Debugging RX state machine.
all: Debugging all state machines.
Description
Using debugging lacp state command, you can enable LACP state machines
debugging on a designated port or ports. Using undo debugging lacp state command,
you can disable LACP state machines debugging on a designated port or ports.
Example
# Enable all LACP state machines debugging.
<Quidway> debugging lacp state all
2.1.5 display link-aggregation summary
Syntax
display link-aggregation summary

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English