Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 BGP Configuration Commands
Huawei Technologies Proprietary
5-18
5.1.18 display bgp routing-table community
Syntax
display bgp routing-table community [ aa:nn | no-export-subconfed |
no-advertise | no-export ]* [ whole-match ]
View
Any view
Parameter
aa:nn: Specify a community number.
no-export-subconfed: Not sending matched route outside AS.
no-advertise: Send matched route to no peers.
no-export: Does not announce the route to the AS or the association outside, but can
advertise to other sub-ASs.
whole-match: Configure to display the exactly matched routes.
Description
Using display bgp routing-table community command, you can view the routing
information related to the specified BGP community number in the routing table.
Example
# Display the routing information matching BGP community number 11:22.
<Quidway> display bgp routing-table community 11:22
Flags: # - valid ^ - active I - internal
D - damped H - history S - aggregate suppressed
B - balance
Dest/Mask Pref Next-Hop Med Local-pref Origin As-path
--------------------------------------------------------------------
#^ 1.0.0.0/8 256 172.10.0.2 100 IGP
#^ 2.0.0.0/8 256 172.10.0.2 100 IGP
For detailed description of the output information, see Table 5-6.
5.1.19 display bgp routing-table community-list
Syntax
display bgp routing-table community-list community-list-number [ whole-match ]

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English