Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 2 Qos Command
Huawei Technologies Proprietary
2-18
[Quidway-qosb-GigabitEthernet7/0/1] line-rate 10
2.1.15 mirroring-group
Syntax
mirroring-group groupId { inbound | outbound } mirroring-port-list &<1-8>
mirrored-to monitor-port
undo mirroring-group groupId
View
System view
Parameter
groupid: Port mirroring group ID, ranging from 1 to 20.
Inbound: Performs monitoring to the packets received by interfaces.
outbound: Performs monitoring to the packets sent by interfaces.
mirroring-port-list: The list of Ethernet ports, means multiple Ethernet interfaces,
donated as port-list={ { interface_type interface_num | interface_name } [ to
{ interface_type interface_num | interface_name } ] }&<1-8>. For detailed description of
interface_type, interface_num, interface_name, please refer to Command Manual –
Port.” &<1-8>” means the previous parameters can be input 8 times at the most.
mirrored-to monitor-port: Specifies monitoring ports.
Description
Using the mirroring-group command, you can configure port mirroring group. Using
the undo mirroring-group command, you can cancel the port mirroring group.
The switch supports multi-to-one port mirroring, that is to copy packets of many ports to
a monitoring port and perform monitoring. S6500 Series Switches configure port
mirroring function through the configuration of port mirroring group. You can configure
one monitoring port and multiple monitored ports in each port monitoring group,
meanwhile, you can specify the direction of the monitored packets.
S6500 Series Switches can be configured with 20 port mirroring groups at the most.
Some cards do not support port mirroring. If you configure port mirroring on these cards,
the system will prompt “Not support”.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English