Huawei Quidway S6500 Series Command Manual

Command Manual - QoS/ACL
Quidway S6500 Series Ethernet Switches Chapter 1 ACL Command
Huawei Technologies Proprietary
1-10
1.1.8 reset acl counter
Syntax
reset acl counter { all | acl-number | acl-name }
View
User view
Parameter
all: All ACLs (including those identified by a number or a name).
acl-number: The sequence number of an ACL, ranging from 2000~3999.
acl-name: ACL name, a case insensitive character string, which must start with an
English letter (a-z or A-Z), and there should not be a space or quotation mark in it; key
word all is not allowed to use.
Description
Using the reset acl counter command, you can clear ACL statistics to zero.
Table 1-4 The comparison between reset commands of statistics information
Command Function
reset acl counter
Reset the statistics information of the ACL which is used in
the case of filtering or classifying the data treated by the
software of switch. The case includes: ACL cited by route
policy function, ACL used for control logon user, etc. The
ACL number ranges from 2000~3999.
reset
traffic-statistic
Reset statistic information of traffic. This command is used in
the case of filtering or classifying the data transmitted by the
hardware of switch. Commonly, this command is used to
reset the statistics information of the traffic-statistic
command.
Example
# Clear the statistic information of ACL 2000.
<Quidway> reset acl counter 2000

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English