Huawei Quidway S6500 Series - Display Ospf Nexthop

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-23
Field Description
E type Type of external route
Forwarding Address Forwarding address
Tag Tag
3.1.21 display ospf nexthop
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf nexthop command, you can view the information about the
next-hop
Example
# Display the OSPF next-hop information.
<Quidway> display ospf nexthop
OSPF Process 1 with Router ID 2.2.2.2
Next hops:
Address Type Refcount Intf Addr Intf Name
---------------------------------------------------------------------
202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2
202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2
Table 3-9 Description of information generated by the command display ospf nexthop
Field Description
Address Address of next hop
Type Type of next hop
Refcount
Reference count of the next hop, i.g., number of routes using
the next hop