Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 5 PIM Configuration Commands
Huawei Technologies Proprietary
5-8
Example
<Quidway> display pim bsr-info
Current BSR Address: 20.20.20.30
Priority: 0
Mask Length: 30
Expires: 00:01:55
Local host is BSR
Table 5-1 Output description of the display pim bsr-info command
Field Description
BSR Boot trap router
Priority Priority of BSR
Mask Length: 30 Length of mask
Expires: 00:01:55 Expire time
5.1.9 display pim interface
Syntax
display pim interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and interface number, used to specify
the interface.
Description
Using display pim interface command, you can view the PIM interface configuration
information.
Example
<Quidway> display pim interface
PIM information of VLAN-interface 2:
IP address of the interface is 10.10.1.20
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds