Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 3 Device Management Commands
Huawei Technologies Proprietary
3-16
Using rdram disable command, you can disable RDRAM of the device.
By default, RDRAM of the device is enabled.
Example
# Disable RDRAM of the device.
[Quidway] rdram disable
3.1.22 schedule reboot at
Syntax
schedule reboot at hh:mm [ yyyy/mm/dd ]
undo schedule reboot
View
User view
Parameter
hh:mm: Reboot time of the switch, in the format of "hour: minute" The hh ranges from 0
to 23, and the mm ranges from 0 to 59.
yyyy/mm/dd: Reboot date of the switch, in the format of "year/month/day. The yyyy
ranges from 2000 to 2099, the mm ranges from 1 to 12, and the value of dd is related to
the specific month.
Description
Using the schedule reboot at command, you can enable the timing reboot function of
the switch and set the specific reboot time and date. Using the undo schedule reboot
command, you can disable the timing reboot function.
By default, the timing reboot switch function is disabled.
 Note:
The precision of switch timer is 1 minute. The switch will reboot in one minute when
time comes to the specified rebooting point.
If the schedule reboot at command sets specified date parameters, which represents
a data in the future, the switch will be restarted in specified time, with error not more
than 1 minute.
If no specified date parameters are configured, two cases are involved: If the
configured time is after the current time, the switch will be restarted at the time point of
To Next Page
Loading...
Need help?
General
