Huawei Quidway S6500 Series - Chapter 2 AAA Configuration Commands; AAA Configuration Commands; Access-Limit; Attribute

Command Manual - Security
Quidway S6500 Series Ethernet Switches Chapter 2 AAA Configuration Commands
Huawei Technologies Proprietary
2-1
Chapter 2 AAA Configuration Commands
2.1 AAA Configuration Commands
2.1.1 access-limit
Syntax
access-limit { disable | enable max-user-number }
undo access-limit
View
ISP domain view
Parameter
disable: No limit to the supplicant number in the current ISP domain.
enable max-user-number: Specifies the maximum supplicant number in the current
ISP domain, ranging from 1 to 4120.
Description
Using access-limit command, you can configure a limit to the amount of supplicants in
the current ISP domain. Using undo access-limit command, you can restore the limit
to the default setting.
By default, there is no limit to the amount of supplicants in the current ISP domain.
The access-limit command limits the amount of supplicants contained in the current
ISP domain. The supplicants may contend for the network resources. So setting a
suitable limit to the amount will guarantee the reliable performance for the existing
supplicants.
Example
# Set a limit of 500 supplicants for the ISP domain named huawei163.net.
[Quidway-isp-huawei163.net] access-limit enable 500
2.1.2 attribute
Syntax
attribute { ip ip-address | mac mac-address | idle-cut second | access-limit
max-user-number | vlan vlanid | location { nas-ip ip-address port portnum | port
portnum }