Huawei Quidway S6500 Series Command Manual

Command Manual - System Management
Quidway S6500 Series Ethernet Switches Chapter 1 File System Management Commands
Huawei Technologies Proprietary
1-35
Example
# Set the data transmission to passive mode.
[ftp] passive
1.4.18 put
Syntax
put localfile [ remotefile ]
View
FTP Client view
Parameter
localfile: Local file name.
remotefile: File name on the remote FTP Server.
Description
Using put command, you can upload a local file to the remote FTP Server.
If the user does not specify the filename on the remote server, the system will consider
it the same as the local file name by default.
Example
# Upload the local file temp.c to the remote FTP Server and saves it as temp1.c.
[ftp] put temp.c temp1.c
1.4.19 pwd
Syntax
pwd
View
FTP Client view
Parameter
none
Description
Using pwd command, you can view the current directory on the remote FTP Server.
Example
# Show the current directory on the remote FTP Server.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English