Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 3 OSPF Configuration Commands
Huawei Technologies Proprietary
3-26
Field Description
Exchange
It indicates that OSPF router sends DD packet to its neighbor routers
to exchange link state information
Loading
In this state, OSPF router requests neighbor routers based on the
updated link state information from neighbor routers and its expired
information, and waits for response from neighbor routers
Full
It indicates that database synchronization between the routers that
have established neighbor relation has been completed, and their link
state databases have been consistent
3.1.23 display ospf request-queue
Syntax
display ospf [ process-id ] request-queue
View
Any view
Parameter
process-id: Process ID of OSPF, ranging from 1 to 65535. The command is applied to
all current OSPF processes if you do not specify a process ID.
Description
Using display ospf request-queue command, you can view the information about the
OSPF request-queue.
Example
# Display the information of OSPF request-queue.
<Quidway> display ospf request-queue
The Router's Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35
Table 3-12 Description of information generated by the command display ospf
request-queue
Field Description
RouterID Router ID of neighbor router
Address
Address of the interface, through which neighbor routers
communicate with the router

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English