Huawei Quidway S6500 Series - Chapter 4 IGMP Configuration Commands; IGMP Configuration Commands; Debugging Igmp

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-1
Chapter 4 IGMP Configuration Commands
 Note:
When running IP multicast protocols, Ethernet switches also provide the functions of
switches. We use routers in this manual to stand for not only the common routers but
also the layer 3 Ethernet switches running IP multicast protocols.
4.1 IGMP Configuration Commands
4.1.1 debugging igmp
Syntax
debugging igmp { all | event | host | packet | timer }
undo debugging igmp { all | event | host | packet | timer }
View
User view
Parameter
all: All the debugging information of IGMP.
event: Debugging information of IGMP event.
host: Debugging information of IGMP host.
packet: Debugging information of IGMP packets.
timer: Debugging information of IGMP timers.
Description
Using debugging igmp command, you can enable IGMP debugging functions. Using
undo debugging igmp command, you can disable the debugging functions.
By default, IGMP debugging functions are disabled.
Example
# Enable all IGMP debugging functions
<Quidway> debugging igmp all