Huawei Quidway S6500 Series - Display Port

Command Manual - Port
Quidway S6500 Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-6
Field Description
Input(total): 0 packets, 0 bytes
- broadcasts, - multicasts
Input(normal): 0 packets, 0
bytes
0 broadcasts, 0 multicasts
Input: 0 input errors, 0 runts, 0
giants, 0 throttles, 0 CRC
0 frame, - overruns, -
aborts, - ignored, - parity errors
Output(total): 0 packets, 0 bytes
- broadcasts, - multicasts, -
pauses
Output(normal): 0 packets, 0
bytes
0 broadcasts, 0 multicasts,
0 pauses
Output: 0 output errors, -
underruns, - buffer failures
- aborts, 0 deferred, 0
collisions, 0 late collisions
- lost carrier, - no carrier
The statistics information of input/output
packets and errors on this port. “-” indicates that
the item doesn’t supported by the switch.
1.1.5 display port
Syntax
display port { hybrid | trunk }
View
Any view
Parameter
hybrid: Display Hybrid port.
Trunk: Display Trunk port.
Description
Using display port command, you can view the names of the ports that are of Hybrid or
Trunk type, and the corresponding VLANs whose packets are permitted by these ports.
Example
# Display the Hybrid ports in the current system.
<Quidway> display port hybrid