Huawei Quidway S6500 Series Command Manual

Command Manual - Network Protocol
Quidway S6500 Series Ethernet Switches Chapter 7 IPX Configuration Commands
Huawei Technologies Proprietary
7-9
7.1.9 ipx rip import-route static
Syntax
ipx rip import-route static
undo ipx rip import-route static
View
System view
Parameter
None
Description
Using the ipx rip import-route static command, you can enable RIP to import static
routes. The imported routes are included in the update packets of RIP. Using the
undo ipx rip import-route static command, you can disable RIP to import static
routes.
By default, IPX RIP does not import static routes.
Note that RIP imports only active static routes; inactive static routes are neither
imported nor forwarded.
Example
# Import the static routes into RIP.
[Quidway] ipx rip import-route static
7.1.10 ipx rip mtu
Syntax
ipx rip mtu bytes
undo ipx rip mtu
View
VLAN interface view
Parameter
bytes: The maximum size of RIP update packets in bytes. It is in the range 432 to
1500 and defaults to 432.
Description
Using the ipx rip mtu command, you can configure the RIP update packet size. Using
the undo ipx rip mtu command, you can restore the default.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English