Huawei Quidway S6500 Series Command Manual

Command Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 Integrated IS-IS Configuration Commands
Huawei Technologies Proprietary
4-25
4.1.28 isis timer lsp
Syntax
isis timer lsp time
undo isis timer lsp
View
Interface view
Parameter
time: Specify the LSP interval, ranging from 1 to 1000 and measured in milliseconds.
The default value is 33 milliseconds.
Description
Using isis timer lsp command, you can configure IS-IS LSP interval on the interface.
Using undo isis timer lsp command, you can restore the default setting.
For the related commands, see isis timer retransmit.
Example
# Set the LSP interval on Interface Vlan-interface 1 to 500 milliseconds.
[Quidway] interface Vlan-interface 1
[Quidway-Vlan-interface1] isis timer lsp 500
4.1.29 isis timer retransmit
Syntax
isis timer retransmit seconds
undo isis timer retransmit
View
Interface view
Parameter
seconds: Specify the the retransmission interval of LSP packets, in the unit of second,
in the range from 1 to 300 and the default value is 5 seconds.
Description
Using isis timer retransmit command, you can configure the LSP retransmission
interval over the point-to-point link. Using undo isis timer retransmit command, you
can restore the default setting.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English