Huawei Quidway S6500 Series Command Manual

Command Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches Chapter 4 IGMP Configuration Commands
Huawei Technologies Proprietary
4-4
View
Interface view
Parameter
None
Description
Using igmp enable command, you can enable IGMP on an interface. Using undo
igmp enable command, you can disable IGMP on the interface.
By default, IGMP is not enabled.
Only multicast function is enabled can the igmp enable command be executed. After
this, you can initiate IGMP feature configuration.
For the related command, see multicast routing-enable.
Example
# Enable IGMP on Vlan-interface 10.
[Quidway-Vlan-interface10] igmp enable
4.1.5 igmp group-limit
Syntax
igmp group-limit limit
undo igmp group-limit
View
Interface view
Parameter
limit: Quantity of multicast groups, in the range of 0 to 1024.
Description
Using igmp group-limit command, you can limit multicast groups on an interface.
Using undo igmp group-limit command, you can restore the default setting.
By default, you can add up to 1024 IGMP groups on an interface.
If the existing IGMP groups exceed the quantity limit you configured during using this
command, the system will not delete the existing entries.
The new configuration overwrites the old one if you run the command for a second
time.

Huawei Quidway S6500 Series Specifications

General

Brand	Huawei
Model	Quidway S6500 Series
Category	Network Router
Language	English